Mitsubishi Outlander CVT Transmissions for Sale

Shop our Mitsubishi Outlander transmission collection, built around the Outlander 2.4L CVT. We cover a wider Mitsubishi transmission lineup, in both FWD and AWD.

The CVT, or continuously variable automatic transmission, shifts smoothly with no steps. We stock Outlander 2.4L CVT units from 2008 through 2022, in FWD and AWD, as used JDM imports and remanufactured options.

Pick your drivetrain below, then check the year range to confirm fitment.

Shop Mitsubishi Transmissions by Model & Drivetrain

We split our Mitsubishi transmissions by drivetrain, so you order the right unit the first time.

Outlander 2.4L CVT, FWD / 2WD

The Outlander 2.4L CVT FWD unit fits Front Wheel Drive Outlanders from 2008 through 2022. This is the most common setup on US-market Outlanders. Choose a used JDM unit or a remanufactured transmission, based on your budget.

Outlander 2.4L CVT, AWD

The Outlander 2.4L CVT AWD unit fits the 4B12 AWD Outlander across the same year range. AWD units carry extra parts for power transfer to the rear wheels, so they are not interchangeable with FWD.

FWD vs AWD: Choosing the Right Outlander CVT

FWD vs AWD is the most important choice you will make. An FWD transmission sends power to the front wheels only. An AWD transmission sends power to all four wheels and uses a different case and internals.

Check your Outlander badge, owner's manual, or VIN to confirm your drivetrain. The wrong unit will not bolt up or work correctly, even if the year matches.

Mitsubishi CVT Reliability & What to Check

The Jatco CVT in the Outlander and Lancer can face overheating, judder, and valve body issues over time. These problems often show up after high mileage or low fluid changes.

A tested used unit or an OEM spec remanufactured transmission solves these issues. We check each unit before it ships, so you get a real transmission replacement ready to run.

Installation Notes: CVT Fluid & Reset/Relearn

Use the correct Mitsubishi CVT fluid for your model, often listed as CVTF J1 or CVTF J4. The wrong fluid can cause shifting problems or damage.

After installation, your CVT may need a reset or relearn procedure. This helps the transmission control unit adapt to the new unit. A shop with the right scan tool can run this for you.

Why Buy a Mitsubishi Transmission from DMV JDM Depot

We stock a focused range of Outlander CVT transmissions, in FWD and AWD, across many years. Each unit ships with a clear transmission warranty from our US warehouse. Our team can help confirm your drivetrain and year before you order.

Shipping, Warranty & Fitment

We offer nationwide shipping for all Mitsubishi transmissions. Each unit carries a 90-day warranty. See our Warranty Policy and Shipping Policy for details. Need a matching engine for a full swap? Check our Mitsubishi Engines collection.

Frequently Asked Questions

How do I know if I need the FWD or AWD CVT?

Check your Outlander badge or VIN. FWD models send power to the front wheels only. AWD models send power to all four wheels and use a different unit.

Is this transmission used, JDM, or remanufactured?

We offer both. Each listing states the condition clearly, so you know exactly what you are getting.

What mileage does the JDM unit have?

Mileage varies by unit. We list mileage details on each product page.

What CVT fluid does it use, and is a relearn required?

Most Outlander CVTs use CVTF J1 or CVTF J4 fluid. A reset or relearn is often needed after installation.

Do you ship nationwide, and what is the warranty?

Yes. We ship across the US and back each transmission with a 90-day warranty.

Ready to find your transmission? Contact DMV JDM Depot with your year and drivetrain, or browse our Mitsubishi Engines collection for a full swap. You can also view all collections.